ActiveCampaign Deliverability: Why Emails Land in Spam

Fix ActiveCampaign deliverability in diagnostic order: DKIM alignment, list sources, complaint and bounce rates, and provider reports before your next send.

Published on

•

ActiveCampaign Deliverability: Why Emails Land in Spam
Do not index
Do not index
A launch campaign sits in spam the day before it goes out, while ActiveCampaign still reports those messages as delivered. Delivered only means the receiving server accepted the mail. It does not mean the recipient opened the inbox tab. ActiveCampaign deliverability is a system of domain alignment, list quality, complaints, and provider-level reputation, and DNS alone will not explain a folder problem.
Table of Contents

In what order should I check ActiveCampaign emails that land in spam?

Deliverability is not a tool problem; it is a system problem. On a shared sending platform, one account's imports and complaint pattern shape how mailbox providers judge the mail that leaves that account. Fixing the subject line first hides the cause.
Run the checks in this order and write down each result before you touch copy or design. Authentication comes first because an unaligned From domain can break everything after it. List sources come next, then bounce and complaint rates, then results split by mailbox provider. Content and links come last. Copy is rarely the first cause, and changing it before the earlier checks makes every later result harder to trust.
Order
Check
Where to look
Red flag
1
Sending domain authentication
Domain settings in ActiveCampaign and headers of a received message
DKIM not aligned with the From domain, or a free mailbox used as From
2
List sources and recent imports
Contact lists, import history and signup forms
A large import in the last 30 days or a source nobody can name
3
Bounce rate per campaign
Campaign reports
Hard bounces above 2% or a sudden spike against the baseline
4
Complaint rate per campaign
Campaign reports
Complaints approaching 0.1%
5
Results by mailbox provider
Reports split by provider
Opens and clicks drop at one provider while others hold steady
6
Content and links
Spam words checker and link destinations
Problems that appear only after a recent copy or design change

Why the order isolates one cause

Each row answers a different question. A free mailbox in the From field fails alignment before list quality even matters. A nameless import from last week explains a bounce spike that a clean domain will not. A drop at one provider, with the others steady, points at reputation with that provider rather than at the whole account.
Use platform engagement only as a rough baseline for sudden change, not as a target. Across campaigns sent from January 1 through December 10, 2025, ActiveCampaign's customer benchmarks put the average open rate at 39.26% and the average click rate at 6.21%, drawn from more than 8.3 million campaigns. Audience mix, security scanning, and Apple Mail privacy behavior can distort both numbers, so compare your own trend after a migration, import, or cadence change.
When you do reach content, scan wording and also image behavior. Animated signature images often fail in clients that block motion, and fallback strategies for animated signature images show how a static frame keeps the signature readable when the animation never plays. If the problem showed up before any design change, leave the template alone until the earlier rows are clean.

How do I make ActiveCampaign mail pass DKIM and DMARC for my own domain?

Authentication comes first. Once DMARC is enforced, a misaligned From domain is no longer a placement problem. It is non-delivery.
notion image
ActiveCampaign's deliverability terminology defines authentication as configuring SPF, DKIM, and DMARC through a sending domain. DMARC offers three policies: none, quarantine, and reject. Quarantine and reject tell receiving systems to treat failing mail as spam or to block it. Either policy also needs a correctly configured DKIM record for that sending domain.
ActiveCampaign is a shared sending environment. The platform can sign the message. Your account still chooses the visible From domain, and that choice decides whether the signature aligns. Check one layer at a time so a platform signature, a domain record, and a From address do not get blamed for the same failure.

Steps that keep alignment honest

  1. Confirm the sending domain belongs to the company, was registered more than 30 days ago, and resolves to a live website. A brand-new domain has no history mailbox providers can trust.
  1. Authenticate that company domain in ActiveCampaign's domain settings. Menu paths change, so follow ActiveCampaign's current help article for the exact clicks rather than a screenshot from last year.
  1. Send a test to a Gmail address and a Yahoo address. Open the full headers and read Authentication-Results. DKIM should pass, and the signing domain in the d= field should match the visible From domain. DMARC should pass on the same message.
  1. Publish DMARC at p=none and read aggregate reports for unauthorized sources and for legitimate senders that fail alignment. Fix those paths before you tighten policy.
  1. Move to quarantine or reject only after legitimate mail aligns. An enforced policy on a broken setup turns a configuration mistake into lost mail, including password resets and receipts if they share the domain.
Forwarding can break SPF while DKIM still survives. DMARC still requires alignment with the visible From domain, so a passing SPF result does not close the check. For the DKIM lookup itself, use the sister tool mailX and its DKIM checker. Do not paste record text from an old doc into DNS.
Leave policy at p=none until every legitimate path aligns. Tightening early converts a fixable mismatch into blocked mail.
From address setup
DKIM result
DMARC result
Likely outcome
Free webmail address used as From
Signed for the webmail provider, not your domain
Fails
Spam placement, or rejection once DMARC is enforced
Company domain with DKIM not set up
Missing or not aligned with From
Fails unless SPF aligns with From
Spam placement that grows with volume
Company domain with DKIM aligned to From
Pass, with the signing domain matching From
Pass
Baseline for inbox placement
The usual ActiveCampaign mistake is a free mailbox, or an unauthenticated domain, in the From field. Gmail and Yahoo then fail DMARC. Authenticate the company domain and send from it. Teams that want the wider sending model, not only the DNS step, can read how authentication fits the rest of the sending setup.

Which list practices keep ActiveCampaign bounces low?

Start with the list. Bounces and complaints usually trace back to where contacts came from long before copy is the problem. Audit every source feeding ActiveCampaign: signup forms, event lists, lead captures, and older files imported because "we might need them."
notion image
Double opt-in on forms that collect unknown addresses keeps typos and stale inboxes out of the file. The confirmation step costs a few signups. It also keeps those addresses from turning into bounces and complaints. If the form is part of a broader acquisition plan, the same discipline applies to how you build the list: collect consent at the source, not after the first send.

How to import without poisoning the file

  1. Validate addresses before upload. Do not discover invalid domains by sending to them.
  1. Map fields so consent and source stay on the contact, not in a spreadsheet nobody keeps.
  1. Tag each import so a bounce cluster can be traced to one batch.
  1. Do not re-add suppressed or unsubscribed contacts through a fresh file. Each send to them is a likely complaint.
A 0.5% to 1% bounce rate can come from ordinary factors, and ActiveCampaign's bounce guidance describes a bounce as a message the recipient's server rejected. Repeated high rates can make providers such as Gmail treat the sender as risky and route later mail to spam. A sudden spike can also be a block that started with complaints, not bad addresses. When the hard-bounce rate climbs across campaigns, stop and inspect the pattern before the next send.
Suppress hard bounces immediately. When soft bounces repeat, read the SMTP response code before deciding the address is dead. Separate invalid addresses, authentication failures, and reputation blocks. Then ask whether those addresses were ever valid, and whether the spike started after a send change. A hard bounce from one batch is a different problem from a deferred 4xx response on an otherwise steady list.
The full cleaning sequence, including what to export before you delete anything, sits in this email list clean-up guide.
Pattern
Likely cause
First action
Hard bounces concentrated in one import batch
Invalid or mistyped addresses from that source
Remove the batch addresses and correct the source form
Bounce spike on a steady list
Authentication failure or provider block
Check DKIM and DMARC, then read the SMTP response codes
Bounce spike that follows a complaint surge
Provider blocking triggered by complaints
Pause sends to the affected provider and find the complaint source
Soft bounces with 4xx deferrals
Temporary throttling by the receiving provider
Reduce volume, let retries run, and read the response text
Bounce rate between 0.5% and 1%
Normal background activity
Track the trend, with no emergency action
Deleting every bounced contact without reading the pattern throws away the diagnosis. A 4xx deferral is not the same event as a dead domain from last month's event list. ActiveCampaign can suppress a hard bounce, but it cannot repair the source that produced it.

Which provider numbers should trigger a review before I send again?

Open campaign reports first for bounce rate and complaint rate. Then open the provider split for opens, clicks, and deferrals. Set a 30-day baseline before you judge any single send. An account-wide average hides a Gmail problem that Yahoo never showed. The split isolates one provider. The account view shows whether the problem follows your list, your content, or your sending environment.
notion image
Complaint rate is the guardrail for programs that reach Gmail and Yahoo. ActiveCampaign's authentication guidance points at Google and Yahoo's bulk-sender line of 0.3% spam complaints, with a tighter operating target below 0.1%. Sustained movement toward that line can trigger filtering or throttling. The same note is clear that a platform-level deliverability figure of 94.2% is not a success benchmark for your account. Inbox placement still depends on domain reputation, who you mail, complaints, alignment, and content history.
Read the split by provider before you draw an account-level conclusion. A Gmail complaint rate can sit under the operating target while one segment is already causing blocks. Compare each provider against the same 30-day baseline so seasonality does not look like a reputation event.
Metric
Threshold
Action
Spam complaint rate
Operating target below 0.1%; bulk-sender limit 0.3%
Review before the next send at 0.1%; pause the affected segment at 0.3%
Hard bounce rate
Apply the bounce thresholds in the list-practices section
Suppress hard bounces immediately
Overall bounce rate
Same bounce thresholds; watch the trend against the baseline
Investigate a rate that does not settle after list and authentication fixes
Opens and clicks by provider
A drop at one provider against the 30-day baseline, with other providers holding
Pause that provider before the next send and check reputation there
Baseline
30-day rolling reference
Compare every change against it

The review loop

Work in this order, not all at once.
  • Segment by mailbox provider. If Gmail drops while the other providers hold, pause Gmail before the next send and check reputation there. A drop at every provider points to a list, content, cadence, or automation change.
  • Suppress hard bounces immediately. Leaving them in the next send repeats a negative signal.
  • Read repeated soft bounces and deferrals by SMTP code. The response text separates throttling, policy blocks, and dead mailboxes.
  • Review complaints after every list, creative, cadence, or automation change. The spike usually has a start date.
The order matters because each check rules out one cause. The provider split rules out account-wide list or content damage. SMTP codes rule out address validity. Complaint timing points to a change date. Do not send the next campaign until the cause has a name. At the bulk-sender limit, pause the affected segment and trace the source before you resume. Sending again "to see if it clears" is how throttling becomes a block.

Which contacts should keep receiving regular sends, and who should move out?

The change that repairs inbox placement, after authentication is fixed, is usually this: regular sends go only to people who still respond, and everyone else moves out of that cadence.
Build four segments in ActiveCampaign and keep the definitions written down so the next marketer doesn't reinvent them.
  • Recently active. Clicked or replied in the last 30 to 60 days. This is the core of every regular broadcast.
  • New subscribers. Still inside a welcome sequence. They have not had a fair chance to engage, so they stay on regular mail.
  • Passive. Opened and never clicked. Widen broadcasts to them only while complaint and bounce rates stay under the review thresholds.
  • Dormant. No meaningful engagement for roughly 120 to 180 days. They do not belong on the regular send.

Sunset without deleting the record

Send dormant contacts one short re-engagement sequence. Suppress people who don't respond from regular campaigns. Do not delete them on the spot. The opt-out and suppression history has to stay intact, or the next import puts them back on a broadcast.
Opens are a weak signal because privacy features mark mail as opened when nobody did. Clicks, replies, conversions, and recent site activity are stronger. A list that "looks engaged" on opens alone will keep a repaired account in trouble.

One-click unsubscribe

Marketing mail needs a working one-click unsubscribe. Gmail and Yahoo's bulk-sender rules require it for qualifying senders, along with authentication and a spam rate kept under their complaint line. A recipient who can't leave in one click reports spam instead. That complaint lands on the same account reputation as your best customers.
Use ActiveCampaign's help documentation for the current automation and unsubscribe settings. Those menus move. What doesn't move is the outcome: if the link fails, complaints rise, and the next campaign is filtered before the copy is even read. Leave unrelated automation builds out of this work. A sunset and a working unsubscribe do more for ActiveCampaign deliverability than another branching workflow.

Which habits keep a repaired ActiveCampaign account in spam?

A clean domain and a cleaned import can still slide backward. Four habits put the mail back in spam. Run a spam words check after the sending habits are fixed, not instead of fixing them.
notion image
One stream for every kind of mail. On ActiveCampaign, marketing, transactional, and outbound traffic often share one sending identity. A weak promotion then drags password resets and order mail with it. Separate the streams, and their sending identities, wherever the platform allows. Leave them mixed and a sale email becomes a support incident.
Full volume on day one after a migration. A newly moved domain that sends yesterday's peak volume looks like an unfamiliar sender that suddenly got busy. Ramp over several weeks, starting with the people who still click. Skip the ramp and providers throttle before the list has a chance.
Reading "delivered" as inbox placement. The delivered count, and a healthy open rate, hide mail that landed in spam. Compare provider-level opens and clicks, and run a placement test. Mailwarm, a sister brand under the same company, covers inbox placement monitoring and a free deliverability test. Skip that check and the dashboard stays green while revenue mail never gets seen.
Ignoring Gmail Postmaster after the repair. Authentication and list cleanup do not watch complaint and spam-rate trends for you. Check Postmaster on a set cadence and pause the next campaign when reputation or spam signals worsen. Leave it unread and the shared account reputation slips back toward filtering with no change in the template.
On a shared sending setup, complaints from one stream rewrite reputation for the others. The useful habit is a named owner who stops the next broadcast when a single signal worsens, before that mail goes out.

What do people ask about ActiveCampaign deliverability?

How should I read the Authentication-Results header?Check the results for SPF, DKIM, and DMARC separately. A pass confirms that a specific authentication check succeeded; it does not establish that the message will reach the inbox. Compare the authenticated domain with the domain in the From address, then investigate any failure against the message's sending path.
What does a 4xx deferral mean in practice?A 4xx response is a temporary refusal, so the receiving provider is asking the sending system to try again later. Check the response text and whether deferrals cluster by provider, domain, or sending stream. A broad pattern can point to volume or reputation pressure, while a narrow pattern helps isolate a provider-specific issue. Avoid repeatedly resending or increasing volume before you understand the cause.
When should I treat a bounce pattern as a list problem?Look at the bounce type and the source of the affected contacts. Hard bounces point to addresses that cannot receive mail; a rise after an import calls for reviewing how those addresses were collected and validated. A bounce rate of 0.5% to 1% may reflect ordinary factors, but repeated hard-bounce rates above 2% warrant a review. Those figures describe signals to investigate, not a guarantee of inbox placement.
ActiveCampaign provides sending and reporting controls; the sender remains responsible for contact quality and sending behavior. Isolate one cause at a time, starting with the provider response, then checking authentication or the affected list as indicated.

When should I bring in ActiveCampaign support or an outside deliverability expert?

Outside help earns its cost when the same incident returns after the fixes, when a domain or platform migration is due next quarter, when Gmail or Microsoft keeps blocking or deferring with response codes nobody on the team can resolve, or when nobody owns the metrics and they go unread.
ActiveCampaign support is the right door for account-level sending limits, suspended sending, and authentication questions on the platform side. Cross-system diagnosis is different. It runs across DNS, lists, streams, and provider escalations, and it needs someone who isn't also shipping the next campaign.
Each customer gets a dedicated account manager and a deliverability expert. MailAdept is a continuous operational support model, not a one-time deliverability project. A single audit captures one moment. Ongoing checks catch the drift that rebuilds the same spam problem a month later. For marketing teams that want that embed, deliverability experts join the existing team rather than replacing it.
This week, run the diagnostic table, write down each result, and decide whether the cause sits on the platform side or the account side. Authentication, list sources, and complaint rate will usually tell you which door to open.
ActiveCampaign deliverability comes down to an aligned company domain, a list you can name the source of, and a cadence limited to people who still respond. The platform accepts the mail. Your account behavior decides the folder. Ignore complaints near 0.1%, or a fresh import of old addresses, and filtering shows up as missed launches and support tickets.
MailAdept puts a dedicated deliverability expert on the team to audit ActiveCampaign authentication, list quality, and provider-level reputation, then watches the domain with ongoing checks and a weekly review. That work covers the spam-folder pattern this article walks through, without treating a one-time cleanup as the whole job. Want a second pair of eyes on your setup? Get a free deliverability audit at MailAdept.

Fix Your Email Deliverability Before It Costs You Revenue

Get expert insights on why your emails go to spam and how to consistently reach the inbox.

Get a Free Deliverability Audit