ConvertKit Deliverability: Fixing Spam Placement in Kit

ConvertKit Deliverability guide for creators on Kit: authenticate your domain, set DMARC subdomain policy, clean cold subscribers and fix spam issues.

Published on

•

ConvertKit Deliverability: Fixing Spam Placement in Kit
Do not index
Do not index
Your Tuesday newsletter looked fine in Kit. The delivered count was high, a couple of subscribers replied, and next week's launch is already on the calendar. Then someone says the issue landed in spam, and another says it never showed up at all.
That gap is the ConvertKit deliverability problem. Kit, formerly ConvertKit, can record a message as delivered when the receiving server accepts it, while the inbox never sees it. The usual cause is a cold segment or a From domain that isn't authenticated and aligned, not the platform average on the dashboard.
Table of Contents

Diagnose a Kit Newsletter in the Right Order

Kit's delivered figure is a transport metric. It confirms the message left the platform. It doesn't prove inbox arrival, and a list-wide average hides a weak cold segment that mailbox providers weigh more heavily than your engaged readers.
notion image
One creator-focused review of ConvertKit put a claimed 99.8% delivery rate next to an 88.2% inbox-placement result, and a separate set of 394,406 messages showed 76.59% inbox placement, 19.83% spam, and 3.58% missing, per that Kit review. The samples don't match, so treat them as a warning, not a score for your account.
Run the checks in this order and write down a baseline before you change a segment, a domain, or a send.
Check
Where to look
Problem signal
1. List origin and engagement
Subscriber source tags and engagement by segment
Giveaway or lead magnet subscribers with no clicks across recent sends
2. Last cleanup and suppression
Subscriber records and suppression tags
Years of sends with no removal of non-openers
3. Domain authentication
Kit sending domain settings and headers of a test message
Kit's shared domain in the headers, or DMARC failing
4. Bounce, complaint and unsubscribe rates
Kit campaign reports
Bounces above 2 percent or complaints above 0.1 percent
5. Placement by provider
Gmail Postmaster Tools, Microsoft 365 message trace, seed inboxes
Problem limited to one provider or to cold segments
6. Acceptance versus placement
Kit delivery reports compared with seed inboxes
High delivered count while seed tests land in spam
Split subscribers from giveaways, lead magnets, and recommendation networks, then count who never clicked on recent sends. Note how long it's been since a suppression pass. Read bounces, complaints, and unsubscribes by campaign, not as one lifetime average.
For placement, use Gmail Postmaster Tools where you have Gmail volume, Microsoft 365 message trace for business recipients, and seed mailboxes at Gmail, Outlook, Yahoo, and Apple. Compare the same message across at least three sends. One bad Tuesday isn't a diagnosis.
If engaged subscribers at several providers fail at the same time and nothing changed on your side, suspect shared sending infrastructure and contact Kit support. If the drop is worse on cold segments, or at one provider after an import or a giveaway, the cause is your own sending practice.
Teams comparing email deliverability software options should use those tools to separate acceptance from placement. They don't replace the list-origin and domain checks above.

Authenticate a Custom Sending Domain in Kit Step by Step

A From address on a free mailbox such as Gmail or Yahoo can't be authenticated for Kit sending. Mail signed by Kit's shared domain doesn't line up with the visible From domain, so DMARC fails and receivers treat the newsletter as someone else's mail. Kit domain guidance is clear that an enforcing DMARC policy without a verified sending domain leaves the visible From and the authenticated identity unaligned.
notion image
Exact menu labels move. Use Kit's help center for the current clicks, and keep this order.
  1. Inventory every system that sends as the From domain: Kit broadcasts, the CRM, the support desk, and invoices. Authenticating Kit while those other streams stay unsigned is how alignment breaks later.
  1. Confirm the account can send. Kit reviews new accounts and may ask for a link to your blog to check that a real person owns the domain and publishes what subscribers asked for, as described in this Kit account review note. Don't schedule launch volume before that approval.
  1. Verify the sending domain in Kit, then publish the DKIM records Kit gives you at the DNS host. Verification has to happen before you tighten any policy.
  1. Merge the SPF include Kit requires into the existing SPF record. A second SPF record makes evaluation fail. If you ignore that, legitimate Kit mail and your other mail can both look unauthorized.
  1. Send a test to a Gmail address and an Outlook address. In the headers, DKIM should pass on your domain, and SPF or DKIM should align with the visible From. Shared-domain signatures in those headers mean you aren't done.
  1. Publish DMARC in monitoring mode (p=none) with an aggregate-reporting address. Receivers check the exact From domain first, then fall back to the organizational domain and apply its p or sp setting. A company-wide reject can catch a news subdomain before you've proved alignment. Confirm the live record with our sister tool mailX at the DMARC checker. Broader authentication checks belong in the same pass so a passing DKIM result isn't the only thing you trust.
  1. Read at least 14 days of reports before you move toward quarantine or reject. Each week after that, review bounces, complaints, unsubscribes, alignment, and placement.
Organizational domain record
Subdomain record
Policy applied to subdomain mail
p=none, no sp tag
none published at subdomain
none, inherited from p
p=reject, no sp tag
none published at subdomain
reject, inherited from p
p=reject, sp=none
none published at subdomain
none, sp overrides p
p=none, sp=quarantine
none published at subdomain
quarantine, sp overrides p
p=quarantine, sp not set
own DMARC record at subdomain
policy from the subdomain's own record, no inheritance
A staged ConvertKit authentication guide flags bounce rates above 2% or complaint rates above 0.1% as hygiene warnings, and describes bounces below 0.5% as the cleaner range. Higher bounces, complaints, or unsubscribes can also trigger platform review, suspension, or termination. Skipping the report window and jumping to reject is how you block your own receipts and sequences.
If you skip verification, Gmail and Yahoo have little reason to trust the From address, support tickets rise, and the domain you need for the launch carries the same doubt as the newsletter.

Clean Cold Subscribers and Rebuild Engagement

Lead magnets, giveaways, and recommendation networks grow a Kit list fast. Many of those subscribers never open or click. Mailbox providers read that silence as a sign the mail wasn't wanted, and the engaged readers get filtered with them.
Tag each growth surface separately in Kit. Creator recommendation networks, giveaways, and lead magnets bring different intent, so they should be measured apart. When one source keeps adding people who never click, slow that source or change the offer. Scheduling another cleanup later doesn't fix a bad offer.
A subscriber who hasn't opened or clicked across the last three sends of a regular newsletter is the one to re-engage.
  1. Export by source tag and last engagement date. You need a named cold segment, not a feeling that "the list is tired."
  1. Send a re-engagement sequence of two or three messages to that segment only. Each message needs a clear reason to click, not a guilt subject line.
  1. Remove or suppress anyone who doesn't respond, and keep the history so you don't import them again. Skipping removal leaves the same drag on the next broadcast.
  1. On a migration, import prior unsubscribes, bounces, and spam complaints with the list. Tag them as a suppression list and ask Kit to bulk-cancel them. Kit's deliverability guidance treats that as required, because subscribers who never opted in raise complaints. A fuller pass is in this email list clean-up guide, and email verification catches addresses that will bounce before you mail them.
  1. Keep the regular newsletter going to people who opened or clicked recently. Pausing the healthy segment while you "fix the list" trains the wrong habit and starves the reputation you still have.
Skip any of those steps and complaints rise, bounces rise, and placement falls at the providers where the cold addresses live. Lost launches and extra support mail follow.
The change that helps most is usually the custom domain plus regular newsletters only to recent engagers, with re-engagement and removal for everyone else. Placement and engagement typically improve over the following weeks. Creators looking for a smarter approach to email marketing still have to do this suppression work, or the smarter calendar never reaches the inbox.

Recommended Setup by Use Case

One verified subdomain can carry Kit newsletters and lead-magnet sends when every stream is fully engaged. Split the moment a stream can damage mail that people need the same day. Transactional receipts and account mail belong on separate infrastructure, because a complaint spike on a broadcast can drag down that reputation. Keep cold outreach off the newsletter domain entirely.
Use case
Sending setup
DMARC rollout
Watch for
Newsletter and lead magnets in Kit
Verified custom subdomain used for Kit broadcasts
Monitoring policy first, tighten after 14 days of clean reports
Cold segments and the complaint trend
Launch and waitlist campaigns in Kit
Same verified subdomain, sent only to engaged segments
Raise enforcement once launch volume settles
Complaint spikes from a re-activated cold segment
Transactional receipts and account mail
Separate service and subdomain, not the Kit broadcast stream
Own record, enforced once alignment is confirmed
Bounce spikes and shared reputation
Cold outreach
Separate domain and separate tool, kept off the newsletter domain
Dedicated record in monitoring mode
Complaints that could spill onto other streams
Start on the newsletter row. In the first month, watch the cold-segment size and the complaint trend on that subdomain. For a launch, don't widen the audience back to inactive subscribers just because the offer is urgent. For receipts, watch bounces on the separate subdomain so a bad import can't stall password resets. For outreach, watch complaints before they touch any domain you use in Kit.
Bulk-sender requirements put Google's commonly cited threshold at about 5,000 messages a day to personal Gmail accounts. Yahoo doesn't publish an equivalent fixed figure. Being under that line doesn't remove reputation risk. A poorly engaged broadcast still affects the same domain you use for important sequences.
Kit's note on the Gmail and Yahoo requirements says senders at that volume need a verified sending domain, DMARC at least at p=none, and spam complaints below 0.3%, with the shift starting in February 2024. A free mailbox From address still can't be aligned with Kit, so none of these rows should start there. Ignore the split and a launch complaint becomes a receipt problem the same afternoon.

Habits That Erode Kit Newsletter Placement

Authentication can be perfect and placement still slips, because the sending habit teaches filters that the mail isn't wanted.
notion image
A sudden jump in volume after a launch or a giveaway raises complaints and bounces. Hold a steady cadence and raise volume in steps. Doubling for one send is how a healthy month turns into a filtered one. If you ignore the ramp, the domain pays for a single weekend of growth.
Resending a broadcast to non-openers multiplies volume at the coldest part of the list, which is the segment already costing placement. One resend feels thrifty. To the mailbox provider it looks like pressure on people who didn't ask for a second copy.
Image-heavy issues and long link lists read as promotions and leave filters little text to judge. Use a few links, real sentences, and alt text on every image. A wall of affiliate links to one domain is a common reason a creator newsletter starts missing the inbox even when the list is fine.
Judging the campaign by open rate on a cold list hides the signal that matters. Clicks and complaints by segment tell you whether the mail was wanted. A pretty open rate on giveaway subscribers will not save the next send.
Adding another giveaway to "fix growth" re-imports the same cold addresses that pushed placement down the first time. Change the offer or pause that source.
Run subject lines and body copy through a spam words checker before a launch. It will not fix a list problem or a domain problem. Treating it as the whole remedy wastes the week you should have spent on cadence and suppression.
Irregular gaps followed by a burst do the same damage as a spike. A steady weekly send to people who recently clicked is quieter, and it holds up better than a heroic catch-up edition.

Decide Whether to Fix It Yourself or Bring in Experts

Give the account two weeks before you declare the platform broken.
In week one, run the diagnostic checks and record the baseline: source tags, cold share, last suppression, header alignment, and placement by provider. In week two, verify the sending domain, publish monitoring DMARC, and start the cold-segment re-engagement. Review reports each week, and don't raise enforcement until those reports show every legitimate sender aligning. Changing three things on Monday and judging the result on Tuesday throws away the baseline.
Outside help is warranted when incidents repeat and nobody can name a root cause, when a domain or platform migration is on the calendar, when a provider is blocking or deferring, or when no one owns deliverability. A one-time look shows the setup on a single day. Ongoing review is what catches the drift that brings the same spam placement back. MailAdept offers a free deliverability audit for that first snapshot, and the ongoing work is what keeps a Kit newsletter from sliding after the cleanup. Switching platforms often doesn't fix a domain reputation or an unengaged list.

How long does placement take to improve

Once the sending domain is aligned and regular mail goes only to recent engagers, placement usually moves over the following weeks, not overnight. Complaints and bounces have to fall first. If you keep mailing the cold segment, the calendar doesn't matter and the same providers keep filtering the next issue.

Will switching off Kit fix spam placement

Usually not, if the cause is domain reputation or subscribers who never click. The new platform inherits the same From domain and the same list. Move only after the cold segment is suppressed and the domain authenticates. Otherwise you pay for a migration and watch the same spam folder.

When should DMARC move to reject

Only after aggregate reports show that Kit and every other legitimate sender align. Reject before that, and you can block receipts, support mail, or the newsletter itself. Stay on a monitoring policy while any stream is still unsigned. A company-wide reject with no subdomain record is the version that surprises people.
For expert deliverability reviews for newsletters, the signal is simple: the same drop keeps coming back, or the migration is closer than the team's time to own it.
MailAdept puts a deliverability expert with the team to audit a Kit or ConvertKit setup, separate a cold list from a real infrastructure problem, and keep watching the domain after the first fixes. That work is for creators and small businesses whose newsletters stopped reaching the inbox, not for a one-day DNS tweak. Want a second pair of eyes on your setup? Get a free deliverability audit at MailAdept.

Fix Your Email Deliverability Before It Costs You Revenue

Get expert insights on why your emails go to spam and how to consistently reach the inbox.

Get a Free Deliverability Audit